Presentation Row Wine Wall Kit (144 Bottles)

Rated 4.67 out of 5 based on 3 customer ratings
(3 customer reviews)
SKU: N/A Categories: ,

The Presentation Row Wine Wall Kit combines two of our most popular sized Wall Series metal wine racks with a presentation row, creating a three-column wide wall of wine.




The Presentation Row Wine Wall Kit combines two of our most popular sized Wall Series metal wine racks with a presentation row, creating a three-column wide wall of wine. This package includes three Wall Series 32 (3 foot, 18-bottle), three Wall Series 33 (3 foot, 27-bottle), and 1 Wall Series Presentation Rack (9 bottles). The entire display, when installed as shown, will be approximately 7-feet tall and 39-inches wide.Install multiple columns to fill a wall or cellar.

Constructed of high-quality steel with powder coated or plated finishes, our racks are durable, easy to install, and great for both residential and commercial applications.

With CAD design services available, let us help you create your wine cellar, or turn your room or wall into a stunning piece of décor.


  • 144-bottle capacity
  • Holds standard 750ml bottles
  • ~ 7-foot height (combination of 3 WS 32, 3 WS33, and 1 WS-PR)
  • 3 standard finishes
  • Includes drywall and wood installation hardware
  • Steel construction
  • Complimentary CAD design services available

Click here for a full listing of applicable U.S. Patents.

Additional information


Satin Black, Brushed Nickel, Chrome Plated, Black Chrome

3 reviews for Presentation Row Wine Wall Kit (144 Bottles)

  1. Rated 5 out of 5

    (verified owner)

    Great bang for your buck!
    Looks awesome in my wine cellar
    My Contractor 1st Choice Remodel ATlanta installed it as it was easy but better left to professionals!

  2. Rated 4 out of 5

    This is a quality system and happy to have it in my home. Simple and effective taking minimal space for maximum amount of wine. If you are installing this yourself here are a few tips and the reason for not getting 5 of 5 stars.
    If you are installing onto a concrete, masonry, or brick wall, VintageView does NOT supply these types of screws (after they told me they do). I used “Tapcon” 3/16” x 1 ¼” inch screws that worked well (found at Home Depot). The flat hex head screw holds the wall kit securely.
    Tips: measure twice, drill once. If equipped, set your drill at just less than half of the slip clutch torque to not strip out the concrete. The ½” screw hole provided in the wall kits may not let you tighten each screw completely, thus you will need a robust flat head screwdriver to completely tighten these screws. Use a hammer drill to drill the holes and purchase at least two 5/32” drill bits as they will dull and make accuracy of the holes hard to keep. I made a straight vertical line on the far right and then worked back to the left, measuring and marking all the screw locations, and found this was the best way to keep my lines straight (both vertical and horizontal). A 4’ level is also recommended for this very reason.
    Recommendations: For these all in one wall kits, it would be nice if Vintage View provided spacing options for various wall heights (8’, 9’, 10’, etc). This would help speed up the install process and utilize the wall height for both efficiency and aesthetics. FYI- I have a 9’ wall and thus used a 4’ long bottom rack, 4” between the presentation rack and both the lower and upper racks. The presentation rack is a little high at 58” at the top but maximizes my wine holding capabilities.

  3. Rated 5 out of 5

    (verified owner)

    Easy to install, look great. Good value

Add a review

Your email address will not be published. Required fields are marked *